diode led Fluid View LED Strip Lights Warm White

diode led Fluid View LED Strip Lights Warm White

TECH SPECS

Dimmable

Sold by unit: spool

Length: 16.3 feet / 5 meters

Weight: 4 oz.

Width: 0.3 in.

Height: 0.1 in.

Bulbs per foot: 18

LED Spacing: 0.65 in. (between centers)

Cuttable : every 3 LEDs / 2 in. / 5cm

Beam Angle: 120°

Voltage: 12V DC

Power Consumption per foot: 1.4W / 120mA

Max. Length on one run: 32.5 ft.

Fixture Surface Temp.: 68° - 104° F

IP Rating: 40 (non-waterproof)

UV/IR Radiation: None

Lifespan: 50,000+ hours

The FLUID VIEW is a light fixture that has it all: it’s dimmable; it’s extremely low-profile, at a tenth of an inch high and third of an inch wide, so it can be used virtually anywhere; it’s a 12V fixture that draws less than 1.5 W per foot, so it’s very cheap to power; and it comes in a rainbow of colors: warm white, cool white, amber, pink, red, green, blue, and purple, so it can be used for any occasion. The Fluid View is cuttable and flexible, giving maximum adaptability for custom lighting projects; and it comes with a 3M adhesive backing which allows for easy mounting on any dry surface.

The Fluid View is applicable in all lighting situations, but especially in interior coves and nooks; display cases and shop windows; kitchen cabinets, closets, and pantries; project lighting such as presentations, light boxes, light tables, and exhibits; and any close application task lighting. This flat strip is sold by the 16.3 foot (5 meter) spool, and emits light in a full 120° beam angle, designed to illuminate fully and consistently. Each Fluid View spool comes with 4.5 inch hard-wired lead wires, and can be powered by either a Plug-In Adapter or Hard-Wired Driver. We recommend soldering this strip to a power source for the most secure and long-lasting connection. Dimming the Fluid View Strip can done in two ways: with a Reign Dimmer Switch and a Hard-Wired Driver; or with a TechnoMagnet Hard-Wired Dimmable Driver and a 120V AC magnetic low voltage dimmer switch.